15
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
Media Mode
The D-LED LCD TV comes with 1 USB port (rear) that can be accessed via Media mode.
Media Mode and USB Connectivity
Plug in your external USB device (USB stick, external hard disk drive) into the USB port of the TV. Drive
numbers (C:\, D:\, E:\ etc) will be allocated depending on the partitions of the USB device (e.g. an
external hard disk drive might have several partitions). For the definition of how drive numbers are
assigned, please see “Drive Assignment Definition” below. (Please note that external USB memory
devices of a capacity of up to 1 TB are supported. However, not all brands and drivers of external USB
memory devices might be compatible with this D-LED LCD TV)
You can select the drive for your recording session.
Please note that the external USB device needs to be formatted first before the recording can be done.
To do this, under DTV mode, in the OSD, go to
SETUP
page then select “
PVR FILE SYSTEM
”.
Select disk drive by pressing “
Q M
”.
At the next screen you will have option to select USB device if there is more then one and to select drive
with directional pad on the remote control (C:\, D:\ etc)
Press “
Q M
” to format.
You can select to format the USB device into FAT32 file system or High Speed FS system by using
directional pad on the remote control:
− FAT32 is suitable for USB thumb drive (USB memory sticks) that will format the entire USB drive
completely. (Attention: All data currently on the USB memory stick will be lost. Please save your data
on your external USB memory stick prior to using it as a recording device)
− High Speed FS is suitable for external USB hard disk drives that will allow choosing how large a new
partition allocated for recording will be.
− While recording, on your external USB device a new folder will be created labelled “
MSTPVR
”.
The OSD will show the file format and size selected, how many minutes of the TV program can be
recorded in either SD quality or HD quality from the source media.
After selecting the system type and size, press OK again will start the formatting.
After the USB device has been formatted, it can be used for recording under DTV mode.
The default recording drives will always be C:\, unless different drive is selected using method from 2-7.
(Please also refer to the part “PVR Function and Drive Assignment” of this manual).
The recording function can be achieved in 2 ways:
− Press the
T G E Q T F
button (PVR =
T G F " E Q N Q W T " D W V V Q P
) directly while watching DTV
programs.
− Through
G R I
scheduling function.
Recording via Record Button (PVR or Red Button)
While watching DTV programs, press the
R X T
button (
T G F " D W V V Q P
) on the remote control.
A symbol for recording will be shown in the upper left-hand corner of your screen.
Make sure that the allocated capacity for the recording is sufficient to complete the recording of the
program you want to save. (The capacity is determined by how large the formatted PVR file folder is
allocated, or how large the USB thumb drive can support.)
Recording via EPG Scheduling
In DTV mode, press
G R I
button to call out the EPG interface.
Select the program that you wish to record via the date and time inside the EPG, and then press the
T G F " D W V V Q P " * T G E Q T F +
.
The interface will show the start time and end time of the recording.
Select the recording mode. The options are:
−
AUTO
Mode: The time will be fixed according to the selected program. Only the selected program
will be recorded from start time to end time.
−
ONCE
Mode: Allows setting the timer. Date and time of the recording can be set manually. The
recording will be done only once.
