AFTER SALES SUPPORT
www.medion.com.au
1300 884 987
MODEL: MD 87227 • PRODUCT CODE: 49188 • 02/2015
14
Guide the camera unit including the transmission cable from the outside to the
inside through the opening in the door.
Place the cover plate onto the opening on the inside of the door and pull the
transmission cable for the peephole through the door and the installation
opening on the cover plate/bracket.
Attach the anti-static cable to green circuit board using the small screw
provided.
Now twist the installation stud back onto the thread for the camera unit from
inside the door until it sits firmly in place. If required, please tighten it with
the aid of the special wrench. The circuit board on the cover plate must be
positioned above the installation stud.
Connect up the cable to the relevant connection on the circuit board found on
the cover plate so that the flexible cable runs downwards.
NOTE!
The doorbell button on the exterior camera unit must be positioned
below the small camera lens during installation so that the images are
not displayed upside down on the screen.
87227 DE Aldi AUS Content MSN 5004 9162 final REV1.indd 14
87227 DE Aldi AUS Content MSN 5004 9162 final REV1.indd 14
07.01.2015 08:56:47
07.01.2015 08:56:47
