2-8
MS-7091 M-ATX Mainboard
Installing DDR Modules
1.
The DDR DIMM has only one notch on the center of module. The module will only
fit in the right orientation.
2.
Insert the DIMM memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the socket.
3.
The plastic clip at each side of the DIMM slot will automatically close.
MSI Reminds You...
You can barely see the golden finger if the module is properly i n -
serted in the socket.
Volt
Notch
MSI Reminds You...
Dual-channel DDR works
ONLY
in the 3 combinations listed in the
table above.
Please refer to the following table for detailed dual-channel DDR. Other com-
bination not listed below will function as single-channel DDR.
DIMM1 (Ch A)
DIMM2 (Ch A)
DIMM3 (Ch B)
DIMM4 (Ch B)
System Density
128MB~1GB
128MB~1GB
256MB~2GB
128MB~1GB
128MB~1GB
256MB~2GB
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB
512MB~4GB
