USB connection
Devices connected directly to the USB BUS may not draw
more than 500 mA. The power output is protected by a fuse
(limited power source as per EN 60950). If you want to
connect devices that require more power, you need to
connect them to two USB ports using a Y cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
− Where possible, always connect your USB devices to the same port that
they were originally installed on. Otherwise you will be assigned a new ID
and the drivers will need to be reinstalled.
Network operation
Wireless LAN (Wi-Fi)
Your PC is equipped with WLAN. The components (module, antenna) have
already been integrated into your PC and activated. You can disable this
function using the Windows® device manager if required.
Wireless LAN enables you to establish a network connection to a
corresponding remote station.
Do not operate your PC’s wireless LAN function in areas
where there are radio-sensitive devices (e.g. in hospitals
etc.). If you are unsure whether the use of these devices will
result in damage or interference, disable this option.
34
AFTER SALES SUPPORT
AUS
USB connection
AUS
1300 884 987
www.medion.com.au
8324 EN ALDI AUS Content MSN 2006 0783 RC5.indb 34
8324 EN ALDI AUS Content MSN 2006 0783 RC5.indb 34
05.08.2015 11:50:37
05.08.2015 11:50:37
