Medion MD 88122, User Manual

Page: 11 / 33

Operation
11
Operation
• The product is a plug-and-play device and requires no driver
installation and setup.
• The maximum distance between the product and USB
receiver is around 33 ft (10 m).
• The product will automatically enter sleep mode if it is idle
for about 10 minutes. Press any button to turn on the product
again.
Before using the product
1. Make sure the batteries 15 /
16
are installed in the keyboard and in the
mouse, respectively (see chapter “Installing or replacing batteries”).
2. Make sure the USB receiver 14 is inserted into the USB port of your
computer (see chapter “Installing the USB receiver”).
Using the keyboard
− The keyboard is ready to use once the USB receiver 14 is connected to the
computer.
− If necessary, fl ip down the support feet 5 to tilt up the keyboard.
− The number lock indicator 1 lights up when the number pad is enabled
for typing numbers.
− The caps lock indicator
2
lights up when the caps lock feature is enabled.
− The low battery indicator 3 lights up when the battery power level is low.
Replace the AAA battery 15 (see chapter “Installing or replacing the batteries”).
− If you are not going to use the keyboard for a long period of time, remove
the AAA battery from the battery compartment. Store the battery in a cool,
dry place and keep it away from children.
Using the mouse
− Slide the on/off switch 13 on the underside of the mouse to the ON position
to switch the mouse on.
The optical sensor 12 lights up when the mouse is switched on.
The mouse is successfully connected to the USB receiver 14 once the
computer responds to mouse movements.
− To confi gure the mouse (including the left button 6 , scroll wheel/middle
button 7 and right button 8 ), go to the mouse setting menu of your
computer’s operating system.