CD/MP3 Micro Audio System MD 81834
13
Start of operation
EN
AUX IN- connection
You can use the
AUX
socket (press the
FUNCTION
button
until
AUX
appears in the display) for connection to an
external audiosignal (e.g. from a cassette recorder).
`
Switch the player to standby mode.
`
Switch your external unit off.
`
Plug the end of the phono cable (not supplied) into
the AUX input socket on the right-hand side of the
player (note correct polarity of right and left
channels).
`
Plug the other end of the phono cable into your
external unit.
`
Switch your external unit on.
`
Switch your player on using the
STANDBY
button.
`
Press the
FUNCTION
button on the remote control or
on the player until “
AUX
” appears in the display. The
audio signal from your external unit will now be
reproduced.
Connecting the subwoofer
`
Insert the end of the connection cable (
CONNECT
WOOFER
) in the socket (
FROM MAIN
) on the rear of
the
SUBWOOFER
. Connect the other end of the
connection cable to the appliance (
CONNECT MAIN
)
using the socket (
TO WOOFER
). The subwoofer is
now connected to the appliance.
iPOD docking connection
You can connect an iPOD docking station to the player.
You can use different adapters with this docking station
.
The iPOD docking station also has a (
VIDEO OUT
) output
on the rear side.
`
As illustrated, insert the iPOD docking station in the
(
DOCKING IN
) socket in the direction of the arrow.
`
Then turn the screw of the iPOD docking station in a
clockwise direction. The iPOD docking station can
now be used.
