14
TV connection with progressive scan function
Component connections
If your unit has so-called component connections (Y, Cb/Pb, Cr/Pr), you
can also connect the unit to the television or data projector using theses
connections. These connections use the so-called „YUV colour format“.
Connect the unit’s Y, Pb and Pr socket to the corresponding socket via a
three-pole video-cinch cable with the corresponding sockets on the
television set or image projector.
For sound transmission also connect the audio-cinch cable.
For connection via the component sockets for genersating the
progressive scan function select the resolution
576p
.
To Progressive Scan
The unit can transmit video signals in PROGRESSIVE SCAN format via the component connections and the
HDMI connection, which gives good image quality. It goes without saying that your TV (or data projector)
must be able to process this format.
In the progressive scan format the image is transmitted in 50 half and 50 full images. This reduces flickering
images to a minimum and displays movements in a more fluid manner.
p- and i-resolutions
With the button
STOP/RES
and in the setup menu
General Setup Page >
HDMI Setup
you can select the resolution for the progressive scan image format
(„
p
“) and the standard image format („
i
“ = „interlaced). Switch on the progressive
scan function by selecting a resolution with „
p
“ .
Switch off the progressive scan function (resolution with „
i
“), if you have not connected the
television set via the component or HDMI sockets.
