Medion MD 19077 User Manual Download Page 61

Page: 61 / 67

4. Close the front ﬂ ap.

5. For test purposes, now sew test fabric, to check that the machine is working

correctly. The excess oil is eliminated directly, without causing damage to your
actual material.

Disposal

Packaging

Your overlock sewing machine has been packaged to protect it from
damage in transit. Packaging materials are raw materials and can
therefore be reused or recycled.

Appliance

Old appliances that carry the symbol illustrated may not be disposed of in
ordinary household waste.

In accordance with Directive 2012/19/EU, these appliances must be
disposed of correctly at the end of their service life.

This involves separating the materials in the appliances for the purpose of
recycling and minimising the environmental impact.

Take old appliances to a collection point for electrical scrap or a recycling
centre.

Contact your local waste disposal company or your local authority for more
information on this subject.

CARD

widely

recycled

www.recyclenow.com

POLYSTYRENE

check local

recycling

PLASTIC

not currently

recycled

BOX

TRAY

FILM

Disposal

Summary of Contents for MD 19077




































































Search results

Summary of Contents for MD 19077

Reviews:

Brands by name

Popular brands

Medion MD 19077, User Manual

Search results

Summary of Contents for MD 19077

Reviews:

Brands by name

Popular brands