9
ES
DE
EN
Initial operation
Connecting the power supply
Connect the USB cable to the USB power adapter.
Plug the power adapter into an easy-to-access wall socket.
Plug the mini USB cable into the USB port on the front of the device.
PLEASE NOTE!
The device will start automatically once the power is turned on.
Switching the device on/off
Press the
STANDBY
button to switch on the device.
Press the
STANDBY
button again to switch off the device.
Inserting and removing SD cards
If no memory card is inserted, photos will be stored in the internal memory.
Please note that the internal memory is limited to 32 MB.
To increase storage capacity, use an SD memory card. If a memory card is
inserted, your photos will be stored on the card.
Insert the card into the card slot with the contacts facing up until it snaps
into place.
To remove the card, push up on it briefly to release it. The card will then
protrude slightly and can be removed.
