54
7. Setting up the device
Place the device on a sturdy, level surface. Some aggressive varnishes can corrode
the rubber feet on the device. If necessary, place the device on a suitable underlay.
7.1. Mains
connection
Connect the mains adapter.
To do this, place the connection cable plug in the socket
DC IN 9V
2.5A
on the rear of the device.
Plug the mains adapter into a properly installed 230 V ~ 50 Hz earthed power
socket, which is easily accessible at all times.
8. Operating the device
8.1. Switching
on/standby
Press and hold the
FUNC.
button until the display switches on.
Press and hold the
FUNC.
again to switch the device back to standby mode. The
display switches off.
8.2. Selecting the operating mode
Press the
M
button once or several times to run through the operating modes:
−
– WLAN mode
−
BT
– Bluetooth mode
−
AUX
– Mode for external device
−
TF
– Memory card mode (only when a memory card is inserted)
8.3. Volume
Press the
+
button to increase the volume.
Press the
button to lower the volume.
If a device is connected via Bluetooth or if a device is connected to the
AUX IN
jack you can also adjust the volume on the devices directly.
Summary of Contents for LIFE P66970
Page 194: ...06 2019...
