174
8. Connecting the soundbar to the mains
Plug the power cable into the AC~ power cable socket.
Check that all the devices you want to connect are connected.
Plug the power cable into a 220–240 V ~ 50/60 Hz socket.
The on/off LED operating display lights up red.
9. Connecting a subwoofer to the power
supply
EU
UK
OR
Plug the power cable into the AC~ power cable socket.
Check that all the devices you want to connect are connected.
Plug the power cable into a 220–240 V ~ 50/60 Hz socket.
9.1. Connecting the subwoofer
The subwoofer automatically connects to the soundbar as soon as both devices are
switched on.
However, if the subwoofer does not connect with the soundbar automatically, pro-
ceed as follows:
Press and hold down the
PAIR
button on the subwoofer for approximately 3 sec-
onds.
The subwoofer switches to pairing mode and the PAIR LED starts flashing rapid-
ly.
Switch the soundbar on either by pressing its button or with the remote con-
trol.
The PAIR LED stops flashing as soon as the connection is complete.
However, if the
PAIR
LED continues flashing, this mean the connection could not
be established. In this situation, unplug the subwoofer for approximately 3 minutes
and then repeat steps 1 and 2.
44202 ML Content MSN 5006 5063 Final Rev2.indb 174
44202 ML Content MSN 5006 5063 Final Rev2.indb 174
15.06.2020 11:21:33
15.06.2020 11:21:33
