40
Telephone:
1300 884 987
Internet: www.medion.com.au
After Sales Support
HDMI
The connected HDMI device does not display a picture.
• Disconnect the HDMI cable and connect it again.
• Switch off the HDMI device and switch it back on.
• The video input of the connected device must be set to this device.
• The utilised HDMI cable must be fully HDMI compatible. A picture may not be dis-
played correctly if a non-standard cable is connected.
The connected HDMI device does not output sound.
• Some HDMI-compatible devices do not have a sound output (refer to the operating
instructions of the connected device).
• If your television does not have a Dolby Digital or MPEG decoder, go to the Settings
menu and set the option
[SOUNDS]
submenu
[AUDIO DIGITAL OUTPUT]
to
[HDMI PCM]
(see page 36).
Resetting the device
One of the following problems occurs:
• The display of the control panel does not work.
• The device does not work without disruptions.
The device can be reset as follows:
• Call up the menu “
SETTINGS/PRIVACY/FACTORY DATA RESET
”.
• Select this item and press
ENTER
to reset all entered settings and to restore the fac-
tory settings of the device.
Do you need more help?
If the above suggestions did not solve your problem please contact us. The following
information would help us:
• What external devices are connected?
• What messages appear on the screen?
• When operating the device, at which step did the problem occur?
• What steps have you already taken to try and rectify the problem?
• Please provide your customer number if you have one.
86589 EN ALDI AUS Content RC5.indd 40
86589 EN ALDI AUS Content RC5.indd 40
17.01.2012 10:06:01
17.01.2012 10:06:01
