ES
EN
DE
43 of 74
button.
The display alternates between time and date: Press the Tuning
button.
For the display to show only the time, press the Tuning
or Tuning
button
once again.
8. Alarm
times
8.1. Setting alarm times
With the device in switched-off mode, briefly press the
A L A R M 1
button to
access alarm mode 1.
The alarm time display flashes.
Press the
▼
- T U N I N G
or
T U N I N G -
button repeatedly until the desired
time is set.
Press the
N A P
/
T I M E R
button to set the desired days (
SA-SU
,
MO-FR
,
MO-SU
).
Press the
A L A R M 1
button repeatedly to set the desired alarm (
radio or
alarm
).
NOTE!
If the alarm is deactivated, neither the radio alarm
nor the standard
alarm
is shown on the display.
If you select the radio alarm, make sure that the volume you set is adequate.
To set the second alarm ‘
A L A R M 2
’, proceed as described above, but by pressing
the
A L A R M 2
button instead of
A L A R M 1
button.
8.2. Activating the alarm
After setting the chosen time for the alarm, the alarm menu will automatically close
after approx. 15 seconds and the data you entered will be saved. The alarm settings
have now been activated and the relevant symbol will be shown in the display:
When the alarm is switched on, one of the following symbols will be displayed de-
pending on the chosen alarm function.
Alarm symbol 1
Radio alarm function
−
The volume of the alarm can be programmed (see “7.3. Device set-
tings” on page 39)
Buzzer (increasing volume of the alarm tone)
83935 ES-EN-DE Aldi ES Content RC1.indb 43
83935 ES-EN-DE Aldi ES Content RC1.indb 43
16.10.2013 11:16:09
16.10.2013 11:16:09
