Phono operation
AFTER SALES SUPPORT
USA
13
www.medionusa.com
866-633-4660
USA
Phono operation
− Remove the protective cap from the pick-up arm
16
.
− If necessary, press the
MODE
button
10
if the operating light
14
is not lit up in red.
− Place a record on the turntable
1
.
− Before playing a single with a larger hole, place the adapter (“puck”)
2
onto the spindle.
NOTICE!
Make sure that the record is free of dust. You can fi nd appropriate record-cleaning brushes
and cloths in specialist retail shops.
− Select the desired speed with the speed controller
8
:
• 33 rpm for LPs
• 45 rpm for singles
• 78 rpm for special singles
− Set the
AUTO STOP
switch
9
to decide whether the record automatically stops at the end of playback (
ON
).
− Release the latch for the pick-up arm
17
and carefully lift up the pick-up arm
16
.
− Move the pick-up arm
16
inwards over the edge of the record or over the point from which you want to play the
record. The turntable
1
starts to rotate.
− Carefully place the pick-up arm
16
onto the position from which you want to play the record.
− If necessary, move the lever for lowering the pick-up arm
3
backwards. The needle goes down and the record
starts to play.
− Control the volume with the volume controller
12
.
− Depending on the setting of the
AUTO STOP
function
9
, the turntable will stop when the record ends and the
pick-up arm remains in its end position.
− If you want to interrupt playback, move the lever for lowering the pick-up arm
3
forwards and carefully move
the pick-up arm back into its mount.
NOTICE!
On some records, playback may stop before the record has completely ended. In this case,
switch off the
AUTO STOP
function with the
AUTO STOP
switch on the rear of the device
(
OFF
). Switch this function back on (
ON
) once playback has been completed otherwise the
turntable will not stop rotating.
AUX IN operation
You can connect a device with a LINE OUT output or a headphone socket (e.g. a CD player or mobile telephone) to the
device’s
AUX IN
input
11
using a cable with a 3.5mm jack plug.
− Switch the device on by turning the volume controller
12
in a clockwise direction. The operating light
14
lights
up in red.
− Press the
MODE
button
10
. The LED fl ashes in red and blue alternately.
− Start the playback at the connected device.
− If necessary, adjust the volume with the volume controller
12
on the record player and on the connected device.
