QSG MD 97460 E6210 EN RC1.FH11 Wed Nov 26 07:46:47 2008 Seite 2
Probedruck
C
M
Y
CM
MY
CY CMY
K
MSN 4002 8149
i
Antivirus software will have been installed on your notebook. You will be asked to register the AntiVirus
software after the first restart after setting up your notebook for the first time.
Carry out this free of charge online registration to release the software and to receive 90 days free updates.
Read about how you can protect your notebook after the expiry of these 90 days in the Operating
Instructions.
Note:
Do not install additional antivirus software as this will degrade the performance of your notebook
computer.
Note:
The operating system and antivirus software are automatically updated when the first online connection
is made. These processes usually take a few minutes, during which time the operating speed of the
computer may be affected although this is only noticeable on initial start-up.
Quick Start Guide
Power supply
Please take special notice of the warnings in the main user manual!
1. Insert the supplied battery carefully into the notebook.
Lock the battery under all circumstances, in order to
avoid it falling out unintentionally.
2. Connect the supplied power adapter to the notebook
at the notebook power socket [
14
].
3. Connect the power adapter via a power cable to a free
AC power outlet. Set the switch on the mains adapter
to position
I
, to provide the notebook with electricity
and to charge the battery.
(Set this switch to
0
, in order to interrupt the electricity
supply.)
For full battery performance please charge and discharge
the new battery two or three times consecutively!
Starting up
CAUTION!
To avoid damage to the display, never place objects on top
of the notebook that would exert any pressure on it. There
is a danger that even slight pressure may break the display.
Activating your antivirus software
Before switching on your notebook computer ensure that
there is not a disc (CD, DVD, etc) in the optical drive. Some
discs may prevent the operating system booting correctly
from the hard drive.
Please find further, more detailed setup
instructions in the supplied "User's Guide".
4. Open the display to the required position with your thumb
and index fingers. To avoid damage to the TFT Display,
never open it more than 120º.
5. Switch the notebook on by pushing the ON/OFF
button [
2
]. The notebook computer will start.
6. The "Welcome" procedure will guide you through
a series of dialogue boxes. The information in each
dialogue box will explain the steps that need to be
taken. Follow the instructions carefully on-screen.
