Operation
17
− Select a suitable location on the wall. There must be adequate ventilation.
− Select four rawl plugs and screws that are suitable for the wall and size of the
fi xing holes
3
.
− Mark the drill holes on the wall.
− Drill the four holes and insert the rawl plugs.
− Screw the appliance tightly.
Operation
− Remove the product from the packaging and remove all the packaging material
and the protective fi lm on the display.
Connecting the charger to the battery
The charger will automatically recognise the battery type connected (6 V or 12 V battery).
WARNING!
Risk of electric shock!
There is a risk of electric shock from live parts of the
appliance.
− Always unplug the mains plug
4
from the mains
socket before attaching the connection clamps to the
terminals on the battery or removing them.
Before disconnecting a car or motor bike battery, fi rst consult the vehicle’s
instruction manual on the potential consequences of disconnecting the
battery.
− If the battery that you wish to charge is connected in the vehicle, fi rst disconnect
the vehicle’s negative terminal connection cord (black)
6
from the battery’s
negative terminal before the charging or trickle charging process (see
Fig. C
).
The battery’s negative terminal is usually connected to the vehicle’s bodywork.
− Then disconnect the vehicle’s positive terminal connection cord (red)
5
from
the battery’s positive terminal.
− Then attach the charger’s positive terminal clamp (red) to the battery’s positive
terminal and then the negative terminal clamp (black) to the battery’s negative
terminal, at a distance from the battery and the fuel pipe.
− Connect the battery charger’s mains cord
4
to a mains socket.
18559 EN-AUS MSN 50059508 Content Final REV1.indd 17
18559 EN-AUS MSN 50059508 Content Final REV1.indd 17
04.07.2018 11:17:56
04.07.2018 11:17:56
