Quick guide
MULTIMEDIA PC SYSTEM MEDION® AKOYA® P2120 D (MD 8836)
Read the Safety chapter in the operating instructions before you begin, and pay attention to the detailed notes on set-up and connection.
Setting up components
Connecting peripherals
When setting up your PC, arrange the cables so that nobody can step on them or trip over them.
Position your PC and peripherals in such a way that the connections are easily accessible.
Notice!
There should be no bootable disk in the
optical drive as this will prevent the operating sys-
tem from being loaded from the hard drive.
7. Follow the initial set-up instructions once the Win-
dows welcome screen has appeared. Step-by-step
instructions will guide you through the process to
be followed.
1. Connect your monitor's signal cable to
the VGA or HDMI connection on your PC.
(Please read the operating manual for your
monitor.)
2. Connect the keyboard and the mouse to a
free USB connection.
3. Connect the speakers to the green audio
output.
Anti-virus software is installed on your PC. The software will automatically be registered when the PC connects to the Internet. With the
free registration you will receive free updates for 30 days.
Notice! Do not install any additional anti-virus software, as this could impair the performance of your PC.
When you connect to the Internet for the first time, the operating system and anti-virus software are updated automatically. This pro-
cess usually takes several minutes to complete. During this period it can adversely affect the operating speed of the computer but this
only occurs on first use.
4. Connect the power cord to the mains con-
nection on your PC, and then plug it into a
socket. The socket must be near to the PC
and easily accessible.
5. Your PC power supply unit has a mains
switch to provide the PC with power. Set
the switch to position I. (If you set it to O the
power supply will be interrupted.)
6. Switch on the PC by briefly pressing the on/
off switch on the top. Your PC will now start
and run through various steps.
Connecting power supply
Start-up
Activating anti-virus software
Parts of the device
5
Power supply (power cord connector and mains switch)
9
USB 3.0 ports
11
USB 2.0 ports
14
Audio input / Speaker RS (rear out)*
15
Headphones socket / Speaker FS (front out)*
16
Microphone socket / Speaker CC/SS (center/subwoofer out)*
20
VGA monitor connection
24
HDMI connection
27
LAN network (RJ45)
*
Connections with double assignments – configuration via software
Keyboard
Mouse
2
Connect keyboard and mouse
4
Connect power cord
5
Switch on mains switch
6
Switch on monitor and PC
Speakers
(not supplied)
Speaker
connection
3
Connect speakers
Monitor
(not supplied)
Monitor connec-
tion (VGA or HDMI)
1
Connect monitor
MSN 2006 1671
5
11
15
16
27
20
24
14
9
8836 DE_EN ALDI BE_LUX QSG MSN 2006 1671 final.indd 2
8836 DE_EN ALDI BE_LUX QSG MSN 2006 1671 final.indd 2
14.12.2015 15:14:52
14.12.2015 15:14:52
