Autoradio_41804_UK.FH11 Thu Oct 14 15:46:44 2004 Seite 9
REMOVING THE CONTROL PANEL
Press the OPEN button (2).
The control panel separates itself from the
housing and you can remove it.
For protection, always keep the control panel in its case.
PROBLEMS DUE TO INCORRECT CABLE CONNECTIONS
In some vehicle models, the standard arrangement of the cables [4] and [7] in the ISO block
A (see below, "ARRANGEMENT OF THE ISO BLOCK") is exchanged at the factory.
If this is the case in your vehicle, certain functions may be impaired: stations may not be
stored properly, for example.
To solve this, the red cable switched plus and the yellow cable (permanent plus) will need
to be reversed in the ISO block.
ARRANGEMENT OF THE ISO BLOCK
BLOCK B Speakers
BLOCK A Electricity supply
1 back right +
1
2 back right -
2
3 front right +
3
4 front right -
4 Switched plus (permanent 12 V supply from main electrical
system)
5 front left +
5 Auto. antenna (also for external amplifiers, etc.)
6 front left -
6
7 back right +
7 Alternating plus (alternating 12 V voltage, via ignition)
8 back right -
8 Earth/ground
A
1 3 5 7
2 4 6 8
B
1 3 5 7
2 4 6 8
Open
8
