62
A)
Press on the pressure pad featuring the hand symbol on the appliance lid.
The lid will open.
B)
Lift up the dust container handle and remove the dust container from the
robot vacuum cleaner.
C)
Remove the EPA filter with EPA filter frame.
D)
Lift up the dust container lid and remove the dust filter.
E)
Empty the dust container over a dustbin.
F)
Rinse the dust container with water. It is not necessary to rinse with water
every time. Never put the dust container in the dishwasher!
Clean the dust filter and EPA filter regularly using the brush supplied.
G)
Once the dust container is dry, reinsert the filter. After cleaning has
completed successfully, reinsert the dust container and close the lid of the
robot vacuum cleaner.
Before using the appliance for the first time, ensure that the filter has been
inserted correctly in the dust container.
8.2. Cleaning the suction opening
After a while, dirt and dust can collect around the suction opening and can reduce
the vacuum power. To avoid this, the suction opening should be cleaned regularly.
Switch off the appliance.
Remove dust and dirt on and in the suction opening using the supplied brush.
8.3. Cleaning the brushes
We recommend that the brushes are cleaned regularly. Please carry out the
following steps:
Switch off the appliance and place it upside down onto a flat surface with the
bottom of the appliance facing upwards.
Release the screw on the brushes using a Phillips screwdriver. Hold the brushes
firmly and pull them straight up to remove them from the appliance.
Clean the brushes to remove dirt and hair.
After cleaning, reattach the brushes. When doing so, observe the markings (R/L)
according to the appliance illustration under “5. Appliance overview” on page
50.
After a while, the brushes will need to be replaced to ensure the appliance
works efficiently. Please contact our Service Centre for more information on
replaceable accessories.
