7
HOW TO USE & CONTROLS
BEFORE TURNING THE UNIT ON
• Ensure that fi lters are correctly installed to the fi lter chamber, that the product is placed on a fl at and
level surface, and that the power is well connected.
• Before the product is plugged in, fi rst of all, make sure that the local voltage corresponds to the voltage
shown on the nameplate.
• For practical needs, keep distance of at least 30 cm / 12 in all round and above the product.
• It is not recommended to get the product close to a curtain or the wall.
POWER ON
• Pressing the Power button on the control panel, and the purifi er will start to operate with a prompt tone
(chime). At the same time, the purifi er will start in Auto mode by default.
• When the appliance is warming up, the AQI aperture of the purifi er is orange, and “- - - -” displays on
the screen.
• You can calibrate the time by pressing the “Timer button” within 40 seconds of warming up. After 40
seconds, the purifi er will display the PM2.5 level according to the current environmental quality, and the
AQI aperture color will display the corresponding color according to the PM2.5 level.
FAN SPEED
Press the button gently to adjust the speed of the air purifi er. The fan has 9 different speed options.