Behinderten - Kinderautositz Kidslover
Behinderten - Kinderautositz Kidslover
Seating the Child
1.
Kidslover is designed and
intended for use only in the rear
seat of a car
2. Open the Child Support Harness
and if necessary release some
strap to make room in the harness.
3. Turn the seat to face out of the
vehicle for easier access (only with
swivel base option).
4. Swing open the trunk supports (if
this option is fitted).
5. Position the child.
6. Close the 5-point support harness,
and adjust to comfortably tight.
7. Turn the seat into the vehicle untill
the lock clicks shut.
8. Secure the child with the 3-point
vehicle seatbelt (1).
Thread the seatbelt through
the belt guides provided at
both lap and shoulder
positions.
9. Position the padded play tray /
crash pad (2) and fix in place with
the velcro straps provided on both
sides (optional).
Care and Maintenance
1. Check all screw connections and moving parts for tightness at 8 week intervals,
service where necessary.
2. Clean with a dry cloth, if necessary use a mild detergent to clean stubborn dirt.
3. The covers are removeable, for handwash at 40 degrees.
Disposal
-
Delivery Packaging is recycleable.
-
All metal parts can be recycled as scrap metal.
-
All other parts (foams, covers), disposal must be in accordance with your
national regulations. Please check with your local authority waste disposal
offices.
-10-
General Information
The Kidslover Disabled Child Car Seat is designed to be used as a restraint system
for disabled children when travelling in a car, it is suitable for installation in most
cars.
The car seat is designed for use in the back seat of a car and requires a functioning
vehicle mounted 3-point seat belt.
The seat can be installed and used on the passenger side or on the drivers side
(location to be specified at purchase).
In addition to the vehicles 3-point seat belt, the Kidslover car seat is equipped with a
5-point support harness, with both shoulders, lap and crotch strap, to provide added
support for the child.
Options are available to offer added postural management and support for the child
where needed.
ATTENTION
THE Kidslover child seat is tested and approved for forward facing
installation in a rear seat position only.
The distance between the childs head and the interior roof lining must be a
least 60mm.
How to Use
Your Kidslover car seat is supplied assembled.
On delivery your dealer should unpack and check the seat, ensure adjustments are
made to suit the vehicle, and fit the seat in accordance with the Instructions.
If fitted with the Stabiliser Bracket, this must be adjusted to the relevant vehicle, the
seat will then be located by pushing the stabiliser bracket into the gap between the
backrest and cushion of the vehicles rear seat.
If fitted with our Iso-fix option, this must be adjusted to the relevant vehicle, the seat
will then be located by latching onto the vehicles Iso-fix locations (Note: this Iso-fix
option is for stability / location purposes, the vehicles 3-point seat belt must always
be used to secure the child).
In order to achieve the optimal seating position, it will be necessary to adjust the
seat to the childs size and requirments. These adjustments should always be
carried out by your dealer.
After instruction, the appropriate person, in the presence of the dealer, should
perform all functions, as well as installation and removal of the car seat.
-3-
Kidslover - Disabled Child Car Seat
Kidslover - Disabled Child Car Seat