9
H
6.
D
E
7.
8.
A
B
After both retraction retainers are clicked in, close the
magnet twist-off cap (H) or the plastic strap with velcro
fastener (size 0).
Put the strap with the magnet twist-off cap (H) around
both retraction retainers.
When both ends of the strap are on top of one another it
clicks in automatically.
Only this procedure will ensure a safe application.
Finally the individual fine adjustment of
headrest and retraction retainers is made:
The headrest adaption is made via angle- and
depth adjustment.
By loosening both locking levers (D and E) the
headrest can be adjusted.
The retraction retainers are to be adjusted to the user´s
upper bodyby loosening the screws A for height and by
loosening the screws B for depth and angle.
Note: between retraction retainers and upper body
must be 1cm difference.
After finishing all adjustments tighten the screws again.
Finally check all add-on parts once more for correct
assembly and adjustment!
