Electronic Circuit Board
Characteristics
- Electronic sensor, with infrared beam.
- Detection distance from 5 to 20 cm adjustable by means of a potentiometer.
- Polycarbonate viewer.
- Selective detection of fixed targets.
- Automatic disconnection system after 120 seconds of continued use.
- Automatic temperature regulation at the air outlet according to the room
temperature.
Maintenance
As preventive maintenance, we recommend using a soft brush to remove dust and dirt on
an annual or bi-
annual basis, depending on the dryer’s operating cycles.
It is also recommended to clean the LEDs regularly using a cloth dampened with alcohol
to ensure the signal is emitted and received properly.
Replacement of the electronic circuit board
Disconnect the three heating element cables that go to the three-way terminal block of the
electronic circuit board.
