Medical Technologies EasyOne Pro Operator'S Manual Download Page 124

Page: 124 / 170

Appendix

124

EasyOne Pro™ / EasyOne Pro™ LAB

12.3 GDT Interface

Introduction

The following describes the interface set up to facilitate the data
communication between

EasyOne Pro™

and an Electronic Medical Record

System (EMR). As an example the integration of the German GDT standard is
described.

Software Settings

The following settings need to be made in the

Configuration

menu:

Parameter

Description

GDT Folder

The GDT folder of the EMR system. This may also be a folder in a network
drive. For convenient path entry the

Browse

button may be used. The

GDT file will be written to this folder and read in from this folder.

Computer Name

Name of the EMR computer.

Export single
measurement value

If this check box is selected, additionally the best values will be included
as single measurement values.

Summary of Contents for EasyOne Pro











































































































































































Search results

Summary of Contents for EasyOne Pro

Reviews:

Related manuals for EasyOne Pro

Brands by name

Popular brands

Medical Technologies EasyOne Pro, Operator'S Manual

Search results

Summary of Contents for EasyOne Pro

Reviews:

Related manuals for EasyOne Pro

Brands by name

Popular brands