7
Product Life Cycle
MEDLIGHT 630PRO product life cycle: 100,000 treatment cycles.
End of device life cycle will be demonstrated by L.E.Ds no longer
emitting light.
Environmental conditions for transport and storage:
Temperature range: Relative humidity range:
within -40°C to +70°C within 10% to 75%
Technical Specifications
14
cm2
6
50
nm
12
Treatment area:
Wave length of light emitted: Joules
per minute:
Joules per 4-minute treatment cycle:
50 mw per Square cm
:
48
MEDICAL EQUIPMENT
WITH RESPECT TO ELECTRIC SHOCK
FIRE AND MECHANICAL HAZARD ONLY
IN ACCORDAANCE WITH UL/IEC/EN 60601-1
And CANSCA C22.2 No. 601.1
0843
Degree of protection
against electric shock:
Type BF Applied Part
CLASSIFICATIONS PER UL/IEC/EN 60601-1
Class II
START STOP
Degree of protection against the ingress of water: IPXO
Attention, Consult
accompanying
documents
!
USE
ONLY
WITH
P/N 1075-0030 AC Adapter—Rating 100-240VAC 50/60 Hz, 0.5-0.8 A
or P/N 1075-0034 Car Adapter—Rating: 12 VDC Nominal
4
Treatment Recommendations
Medical Devices, Inc. recommends the use of three, 4-minute treatment
cycles per session. During the first 4-minute treatment cycle your skin
temperature will rise to a therapeutic level. Continue two additional treatment
cycles to achieve optimal therapeutic benefit.
In general, Medical Devices, Inc. recommends two to three sessions
spaced throughout the day. However, treatment may be repeated as
often as needed.
Usage Tips
For minor muscle pain and/or spasm:
•
Identify the location of pain and apply the device directly to area.
For joint pain and arthritis:
•
Apply the device to the joint line
area where the two bones meet
(Fig. 1).
For hard-to-reach areas:
•
A Flexible Velcro Holding Strap is
included with the Medlight
630PRO to provide hands free
operation during treatment. Insert
the device into the loop of the
strap being careful not to cover
fan vents (Fig 2 and 3).
Hold the LED light source over the treatment area and fasten the Velcro
holding strap to comfortably and securely hold the device in place.
Fig.1
Fig. 3
Fig. 2
© 2018 Medical
Devices, Inc.