Medic Therapeutics MT-AIRPURIF-001, Manual

Page: 4 / 5

MAINTENANCE
Be sure to unplug the power adapter before performing any maintenance.
1. Clean the filter once a month. The surface of the filter should only be cleaned with a brush or a dry
cotton cloth. Do not wash the filter with water or detergent. The filter can easily break or become
deformed. Do not press hard when cleaning. If the filter gets damaged, make sure to replace it with a
new one.
2. Replace the filter once every 8-12 months. Depending on the place and the method of use, such as
heavily polluted areas, smoking by family members, etc., the filter replacement cycle may be shortened.
Please replace the filter in time when the filtering effect is no longer effective.
3. Outer surface cleaning: Wipe the outer surface and air inlet and outlet with a soft cloth. Do not use
chemical cleaner.
4. If left idle for a long period of time, make sure to unplug the power adapter, clean the outer surface and
the filter. Cover the air purifier with a plastic bag and store it in a room with low moisture levels.
PRODUCT SPECIFICATIONS
PRECAUTIONS
1. Do not use liquid to clean or spill this product.
2. There is a high speed wind wheel in the purifier. Do not put your hands or foreign objects into the air
inlet and outlet.
3. Place the purifier as far as possible out of reach of children. Do not give this product to children.
4. Do not put your hair, fabric, etc. close to the main unit to avoid getting in or blocking the air inlet and
outle blocking the air inlet and outlet.
5. In order to improve the purification effect, try to close the doors and In order to improve the
purification effect, try to close the doors and windows when using the product. (Please ventilate when
using with the burner to avoid carbon monoxide poisoning.)
6. Do not use power adapters of different specifications. Please install the power adapter supplied with
this product.
7. Do not use this purifier in the bathroom or other places with high temperature, humidity and water.
TROUBLE SHOOTING
LIMITED LIFETIME WARRANTY
Your Medic Therapeutics Air Purifier is backed by a limited lifetime manufacturer’s warranty. Medic
Therapeutics will repair or replace your device at any time should it fail due to a defect in material or
workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results from unauthorized or improper use, service,
or repair. Further, it does not cover damage caused by accident, impact, negligence, or normal wear and
tear. Should you discover your Medic Therapeutics Air Purifier is not functioning properly, please send your
device to our repair center for evaluation. If your product cannot be repaired or serviced we will reserve
the right to change it for a similar or newer model.
Please note that a flat rate of $35.00 will be charged to cover a service evaluation fee and return shipping
of your device. All warranty claims must be accompanied by a copy of your proof of purchase from an
authorized retailer. Please send your device, proof of purchase, and a check or money order in the amount
of $35.00 made out to Medic Therapeutics to:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33009
EPA Certification Number: 97483-CHN-1
Product Name: Air Purifier Negative ions: 5millions/cm³
Product Size: 208x208x323mm Adapter Voltage: 100-240V 50/60Hz
P acking Size: 246x246 x405mm Rated Voltage: 24V DC
Product Weight: 1.8KG Rated Power: 22W
HEPA Filter: H13 level CADR Particles 150(m³/h)
Application Area: ≤25m
2
Noise: ≤55 dB(A)
UVC type: Cold Cathode UVC tube Product NO: MT-AIRPURIF-001
6 7
Phenomenon Possible Reasons and Solutions
The filter is too dirty and has not been replaced for a long time replace
the filter.
The filter is flooded or used in a wet environment replace the filter.
Odor Re use after a period of storage clean the filter, if not, replace the filter.
If there is burnt smell immediately stop using, unplug the power supply,
contact repair.
No wind at the outlet
The motor is not running check if the power supply is normal, replace the
power ad aptor or contact repair.
No effect Filter failure replace the filter.
Used in inappropriate places (large area).