LEG TONER
QUICK ASSEMBLY GUIDE
ADJUSTING THE HEIGHT:
Warning:
Do not try to adjust the height when standing on the Leg Toner.
This should be performed while standing on the floor.
STEP 1 -
Unscrew knob 04 and remove it
from the pole.
STEP 2 -
Adjust the handlebar to the desired
height and align the hole on handlebar 01 at
the hole of knob 04.
STEP 3 -
Insert the screw and turn the knob
LIMITED LIFETIME WARRANTY:
Your Medic Therapeutics Leg Toner is backed by a limited lifetime
manufacturer’s warranty. Medic Therapeutics will repair or replace your
device at any time should it fail due to a defect in material or workmanship,
subject to the certain limitations.
This limited warranty does not cover any damage that results from
unauthorized or improper use, service, or repair. Further, it does not cover
damage caused by accident, impact, negligence, or normal wear and tear.
Should you discover your Medic Therapeutics Leg Toner is not functioning
properly, please send your device to our repair center for evaluation. If your
product cannot be repaired or serviced, we will reserve the right to change
it for a similar or newer model.
Please note that a flat rate of $35.00 will be charged to cover a service
evaluation fee and return shipping of your device. All warranty claims must
be accompanied by a copy of your proof of purchase from an authorized
retailer. Please send your device, proof of purchase, and a check or money
order in the amount of $35.00 made out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
