7. Insert the cable connector tube into
the corresponding socket of the leg
massager.
8. Insert the power plug into the
corresponding socket of the leg
massager.
9. Plug the power adapter into a power
source outlet.
10. Press the power button on the
remote control to turn on the leg
massager and select your desired
massage mode, intensity and heat.
REMOTE CONTROL OPERATION
1. Short press the power button to turn on the massager. The
default massage setting is pressing mode with low intensity.
2. Short press the heat button to turn on the low temperature
heating, then press the heat button a second time to
turn on high temperature heating. To turn off the heating
function, press the heat button a third time.
NOTE: The knee region contains the heating surface.
3. Short press the massage mode button. The mode will switch
between pressing, kneading, and shiatsu modes of massage.
4. Short press the intensity button. The massage intensity
pressure will switch from low, to medium and then high.
5. Press the power button to stop the massage after use.
6. The massager has a set default timer of 15 minutes. It will
automatically stop operating after 15 minutes and enter
a state.
CLEANING & MAINTENANCE
Please remember to turn off the power before cleaning.
• Clean the massager with a slightly damp towel and then dry
it with a soft cloth.
• Do not use detergent, a rough cleaning brush, gasoline,
kerosene, glass cleaner or thinner to clean the massager.
• After use and cleaning, store the massager in its original
box or in a safe, dry and ventilated place to avoid exposing
the massager to moisture or direct sunlight.
Pattern
Button
Feature & Operation
Power
Turn on / off power
Heat
Heating function:
low or high
Mode
Pressing, kneading or
shiatsu
Intensity
High, medium or low
Problem
Cause
Possible Solution
Does not
Operate
The power adapter is not
connected to the controller.
Turn on / off power
The power adapter is not
plugged into the socket
tightly.
Plug the AC plug of
the power adapter
into a household
outlet tightly.
Automatically
turns off
The 15-minute time set by
the automatic timer has
expired.
Turn on the
massager again.
Uneven
pressure on
the left and
right legs
bent tube
Prevent the tube
from bending.
Does not
heat up
Intensity
Firmly insert the
tube connector into
the controller.
Pressure
Heat
ON/OFF
Mode
Pressure
Heat
ON/OFF
Mode
Pressure
Heat
ON/OFF
Mode
Pressure
Heat
ON/OFF
Mode
Pressure
Heat
ON/OFF
Mode
TROUBLESHOOTING
If you encounter problems during use, please refer to the
following tips and possible solutions.
LIMITED LIFETIME WARRANTY
Your Medic Therapeutics product is backed by a limited lifetime
manufacturer’s warranty. Medic Therapeutics will repair or
replace your device at any time should it fail due to a defect in
material or workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results
from unauthorized or improper use, service, or repair. Further, it
does not cover damage caused by accident, impact, negligence,
or normal wear and tear. Should you discover your Medic
Therapeutics product is not functioning properly, please send
your device to our repair center for evaluation.
If your product cannot be repaired or serviced, we will reserve
the right to change it for a similar or newer model.
Please note that a flat rate of $40.00 will be charged to cover
a service evaluation fee and return shipping of your device. All
warranty claims must be accompanied by a copy of your proof of
purchase from an authorized retailer. Please send your device,
proof of purchase, and a check or money order in the amount of
$40.00 made out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
