HOW TO USE
PLEASE NOTE!
•
Do not use the device while driving a motor vehicle.
• Unwind the connecting cable fully before use.
• The massage mat must not be folded up or covered when it is switched on. Do not place the
controller and the connecting cable on or under the massage mat during operation.
1. Join together the seat surface (8) and back surface (1) using the hook and loop fastener.
2. Plug together the connecting cables (9) of the two surfaces.
3. Place the massage mat on the seat and fix it in place there with its fastening straps. To secure
it to a car seat, the seat surface also has two rubber loops which can be placed around the
adjusting wheels for the backrest of the car seat.
4. Connect the coaxial connector of the main adapter or car adapter to the socket of the device.
5. Plug the main adapter into an easily accessible plug socket or plug the car adapter into the
cigarette lighter of the vehicle.
6. Sit down on the massage mat and lean back.
7. Start the ignition if using the device in a vehicle.
8. Press the I/O button (12) to activate the massage mat. The vibration and also the heating or
cooling function can then be switched on:
- Start and stop the vibration by pressing the
button (13). Various types of vibrations
are sequenced through after the start.
– To activate the two level heating function press the
button (15). Press once for high
heat. Press twice for low heat. Press a third time to turn heating function off.
– If the
button (14) is pressed once, the cooling switches on at the highest level. There
are five cooling levels. Each further press of the
button switches the cooling to a
lower level until it is switched off entirely.
-
NOTE: The heating and cooling functions cannot be switched on at the same time. The
vibration and heating function are automatically switched off after 30 minutes of constant
operation.
9. After use, press the I/O button to switch the device off completely.
10. Pull the main adapter out of the plug socket or pull the car adapter out of the cigarette
lighter.
11. Allow the device to cool down if the heating function was activated before it is stored away
(see the “Cleaning and Storage” chapter).
CLEANING AND STORAGE
• When storing it away, do not press the massage mat together too strongly and do not
use any force. It could be damaged.
• Do not use any sharp or abrasive cleaning agents or cleaning pads for cleaning. These may
damage the surfaces.
• Make sure that the massage mat is not connected to the main power.
• Wipe down the massage mat and the controller (5) with a damp cloth. Then dry it with a soft
cloth or allow it to dry in the air.
• Loosely fold up the massage mat and place it together with the controller in the associated
packaging. Store the device in a cool, dry place which is protected from direct sunlight and is
out of the reach of children and animals.
• Do not place any objects on the folded massage mat, so that it is not compressed.
