background image

 

LinkIt 7697 HDK v10 User's Guide 

 

 

© 2015 - 2017 MediaTek Inc.

 

               Page 5 

This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s).  

Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited. 

 

Introduction 

 

Overview  

MediaTek LinkIt™ 7697 hardware development kit (HDK) is part of LinkIt development platform for RTOS and is 
based on a highly integrated MediaTek MT7697 SOC with an application processor, a low power 1x1 11n single-
band Wi-Fi subsystem, a Bluetooth Low Energy subsystem and a Power Management Unit. The application 
processor subsystem contains ARM Cortex-M4 with floating point unit microprocessor.  

The HDK supports peripherals, including UART, I2C, SPI, I2S, PWM, IrDA and auxiliary ADC. It also includes an 
embedded SRAM/ROM. The Wi-Fi subsystem contains 802.11b/g/n radio, baseband and MAC that are designed to 
meet both the low power and high throughput application requirements. It runs on a 32-bit RISC CPU that could 
fully offload the application processor. The Bluetooth Low Energy subsystem contains the Bluetooth radio, 
baseband and link controller and uses the same 32-bit RISC CPU for the Bluetooth protocols. The LinkIt 7697 HDK is 
shown in Figure 1. 

The main features of this HDK are: 

 

Breadboard compatible form factor. Developers can use breadboards to connect peripherals with this 
HDK conveniently to build their applications. 

 

Auxiliary LED and buttons to reset the board and to program a user-defined functionality. 

 

An on-board USB-to-UART conversion chip to access logs and conveniently update the firmware. 

 

Serial Wire Debug (SWD) interface. 

 

mt76x7-uploader tool

, enables the HDK to switch between flash normal mode and recovery mode 

automatically without user intervention. 

 

Developers can program the board with the native LinkIt SDK using GCC, IAR embedded workbench, or 

Keil µVision IDE. Development with Arduino IDE is also supported.  

 

Figure 1. LinkIt 7697 HDK v1.0 

Summary of Contents for LinkIt 7697 HDK















Reviews: