Mediatek Labs LinkIt Developer'S Manual Download Page 4

Page: 4 / 40

MediaTek LinkIt™ Development

Platform for RTOS Wi-Fi Developer's

Guide

Page iii of iii

This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s).

Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.

Lists of Tables and Figures

Table 1. Supported features of different chipsets .................................................................................................. 1

Table 2. Libraries for the Wi-Fi mode configuration ............................................................................................... 2

Table 3. Configuration functions ............................................................................................................................. 4

Table 4. The supported security modes .................................................................................................................. 6

Table 5. Wi-Fi events ............................................................................................................................................. 10

Table 6. Configuration and connection APIs in the AP mode ............................................................................... 14

Table 7. The functions not supported in repeater mode ...................................................................................... 20

Table 8. Scan mode ............................................................................................................................................... 22

Table 9. Scan option .............................................................................................................................................. 22

Table 10. Channels supporting 2.4G ..................................................................................................................... 22

Table 11. Channels supporting 5G ........................................................................................................................ 22

Table 12. Scan APIs ............................................................................................................................................... 23

Table 13. Smart Connection APIs .......................................................................................................................... 27

Table 14. RX filter definitions ................................................................................................................................ 28

Table 15. WPS APIs................................................................................................................................................ 31

Figure 1. Software architecture .............................................................................................................................. 3

Figure 2. Repeater mode topology ....................................................................................................................... 19

Figure 3. Communicating with an IoT device using Smart Connection ................................................................. 26

Summary of Contents for LinkIt









































Search results

Summary of Contents for LinkIt

Reviews:

Brands by name

Popular brands

Mediatek Labs LinkIt, Developer'S Manual

Search results

Summary of Contents for LinkIt

Reviews:

Brands by name

Popular brands