6
English
Preparation for use
•
Place the appliance on a stable, horizontal and even surface.
•
Do not place the appliance on surfaces that are not heat resistant.
•
Put the basket in its lodging
•
Connect the power plug
•
Do not fill the pan with oil or other liquids.
•
Do not put anything on top of the appliance,the airflow will be interrupted and will affect the final frying result.
Using the appliance
The MEDIATEC oil-free fryer can prepare a wide range of foods.
1.
Connect the power plug to a grounded power outlet.
2.
Remove the container and the cooking basket
3.
Put the ingredients in the basket.
4.
Reposition the container in the hot air fryer.
Be sure to carefully align the guides in the body of the fryer.
Never use the appliance without the basket.
Note:
if you wish, you can also let the appliance preheat without ingredients. In this case, set the timer to 3/5 minutes and wait for
the heating indicator to go off (after about 3 minutes). Then fill the basket and start cooking.
Warning:
do not touch the basket during and after use, as it becomes very hot. Hold the container only by the handle.
5.
Determine the preparation time required for the ingredients .
6.
Activate the control panel as follows.
A.
The timer starts the countdown of the set preparation time.
B.
During the hot air frying process, the power light turns on and off from time to time. This indicates that the heating element is
switched on and off to maintain the set temperature.
C.
Excess oil from the ingredients is collected on the bottom of the pan
WARNING
Do not press the handle button during the shaking.
Tip: to reduce the weight, you can remove the basket from the container and shake only the basket, taking care not to burn yourself,
for this operation it is best to use a kitchen glove. To do this, remove the container, place it on a heat-resistant surface and press
the handle button and lift the basket.
7.
When the alarm rings, the set preparation time has expired and the cooking is completed. Remove the container from the appli-
ance and place it on a heat-resistant surface.