8
Assembly.
1 Place the Motor Base on a dry, level counter
top. Ensure the dial is set to the "
OFF" position
and the unit is unplugged.
2 Place the Pulp Basin on top of the Motor Base.
Align the
Pulp Basin with the Motor Base so that
the spout is aligned with the dimpled side of the
Motor Base.
3 Align the Sieve with the motor drive coupling
and push down until it clicks into place. Handle
the
Sieve by gripping the top edges being
careful not touch the sharp teeth on the base of
the
Sieve. Ensure the Sieve is properly seated in
place and securely inside of the Pulp Basin.
4 Place the Basin Cover over the Sieve and
Pulp Basin. The side “ears” on the
Basin Cover
should align with the “ears” on the sides of the
Pulp Basin.
M28292_M29947_NBJXX100_Juicer_Manual_EN_20210511_CP.indd 8
M28292_M29947_NBJXX100_Juicer_Manual_EN_20210511_CP.indd 8
11.05.21 14:06
11.05.21 14:06
