Medias Mediatrix 1204, Reference Manual

Page: 33 / 390

Panels Reference Manual (SIP Version)
Mediatrix 1204 7
Rear Connectors
The Mediatrix 1204 has several connections that must be properly set. Figure 2 shows the back panel of the
Mediatrix 1204.
Figure 2: Back Panel Connectors
Table 6 describes the back panel connections.
Table 6: Back Connections of the Mediatrix 1204
Connection Description
Ethernet A 10/100 BaseT Ethernet RJ-45 connector for access to a LAN.
Port 1, 2, 3, 4 RJ-11 connectors for access to standard SCN telephone lines or analog PBX
extensions.
Power connector IEC320-C14 Power Cord Receptacle. This power cord supplies an internal
Switching Mode Power Supply (SMPS) Universal input.
Default Settings switch Resets configuration parameters of the Mediatrix 1204 to default (known) values.
It can be used to reconfigure the unit.
Warning : Read Section “Default Settings Switch” on page 19 before attempting
to reset the unit.
RJ-45 connector for
10/100 BaseT
Ethernet access
Factory Default
Settings
RJ-11 connectors for
SCN Line (FXO)
Universal Power
Supply Input