MediaQ MQ-1132, User Manual

Page: 6 / 8

MQ-1132 / PCI Evaluation Board Users Guide
MediaQ Incorporated
Board Revision 2
Revision A 4/12/01 Preliminary 6
3003022. Power is supplied by this connector for most panels. The pin assignments for the generic
connector are shown below:
Pin Signal Signal Pin Pin Signal Signal Pin
1 GND FVSYNC 2 31 R5 GND 32
3 R0 GND 4 33 GND G4 34
5 GND B5 6 35 G0 GND 36
7 R1 GND 8 37 FMOD LP 38
9 GND B4 10 39 G1 GND 40
11 R2 GND 12 41 GND DESPL 42
13 GND B3 14 43 G2 GND 44
15 R3 GND 16 45 GND ENVEE 46
17 GND B2 18 47 G3 3.3V* 48
19 SCLK GND 20 49 GND 3.3V* 50
21 GND B1 22 51 5V* GND 52
23 PWM1 GND 24 53 -11_7V* GND 54
25 PWMCON0 B0 26 55 -15V* GND 56
27 R4 GND 28 57 +15V* GND 58
29 FLCLK G5 30 59 FP_MODE NC 60
* From HR TFT Power Sequencing circuitry
MQ11XX INITIALIZATION
The following files are needed to run the initialization test for the MQ1132 /PCI evaluation board.
These files should be included in the package.
•
MQ11xxTest.exe
•
MQ11xxPCI.dll
•
MQPCI.dll
•
MQPCI.sys.
MQ11xxTest program should be run under WindowNT/2000.
The command is:
MQ11xxTest <PanelType> <Bpp>