---------------------------------------------------------------------------------------
TV Function
Getting Started
1. Plug the Power Cable into AC In on the back of the TV
2. Press [
Power
] button on the Remote Controller or Front Panel of it.
3. Change Channel by pushing ’
C/-[
/
] button or number keys on the Remote Controller.
4. Press ‘[
/- [
/
] to adjust volume level.
*The current source mode and the channel number are shown up in the top-right corner of the screen.
*Check the Antenna and Power Cable Connection if there is no display.
--------------- Channel
Scanning Channels (Automatic)
This will scan all the available Channels. Channel scan should be done before using this product.
*You should set the proper TV reception method, ‘Air’ for outdoor air antenna and ‘STD, HRC & IRC’ for your cable
TV System. For the cable system, please contact your local cable TV provider.
1. Press
MENU
[
] button on the remote control and navigate by
pushing C/- Keys to select ‘Channel’ menu.
2. Press
Volume
[
/
] button to enter
[Channel
]
Menu.
3. Set your TV reception method among [Air/Cable/Hrc/Irc],
Tip
To do channel search, set the TV reception method, such as ‘Air’, ‘Cable STD’, ‘Cable Hrc’ or ‘Cable Irc’. All the
available Digital (ATSC) and Analog (NTSC) TV channels are scanned in each TV reception method and stored
after the channel scan. When you watch TV, the channel system is set to DTV as a factory default and can be
changed by pushing DTV/TV button on Remote Controller.
