Spooky Blue V4 Laser Projektor
14
3. Operation
3.1 Setting DMX address
adjust the DMX address with the first 9 DIP switches on the backside.
Switch 10 puts the Spooky into demo mode, it will then cycle through the a
specific number of animations.
3.2 DMX channel occupation
1
st
channel:
Pattern (Gobo)
DMX 000-255 patterns change every
4 steps, see 3.4 for details
2
nd
channel:
Strobe
DMX 000-009 laser off
DMX 010-137 laser on
DMX 138-255 strobe speed
3
rd
channel:
Zoom
DMX 000-120 zoom statically
DMX 138-255 auto-zoom (pump)
4
th
channel:
Rotation
DMX 000-120 rotate 0°-360°
DMX 138-255 auto-rotate speed
5
th
channel:
Wave
DMX 000-120 moving wave
DMX 138-255 static wave
6
th
channel:
Blanking
DMX 000-060 blank image (amount)
DMX 068-120 auto-blank speed
DMX 138-255 Color (Spooky RGY)
7
th
channel:
Animation speed
DMX 000–019 Normal speed
DMX 020–255 Speed increase
8
th
channel:
Spooky Mode
DMX 000–128 V3 Compatibility
DMX 129–255 New V4 Mode
9
th
channel:
Sound-to-Laser Mode
DMX 000 – 019 Sound-to-Laser Off
DMX 020 – 042 Sound-to-Zoom
DMX 043 – 066 Sound-to-Rotation
DMX 067 – 089 Sound-to-Change
DMX 090 – 113 Sound-to-Morph
DMX 114 – 136 Zoom + Change
DMX 137 – 160 Zoom + Morph
DMX 161 – 183 Ro Change
DMX 184 – 207 Ro Morph
DMX 208 – 230 Rot + Chang + Morph
DMX 231 – 255 Rot + Morph + Zoom
10
th
channel:
Beat divider
DMX 000 – 255 Divider increases
3.3 Q&A
Before contacting your dealer, please read the following frequently asked
questions, maybe we already have the clue to your problem.
Q: I have four Spookies, one is brighter than the others. Are the other
three damaged?
A: Most likely not. The brighter one may have a slightly higher power, as
described above, maybe 45mW instead of the usual 35mW. This is not an error
and cannot be changed. These are normal tolerances, possibly due to
different temperature coefficients of the laser cristals. A 150 mW laser,
for example, can have up to 200mW, depending on the ambient temperature.
Q: My Spooky won’t work.