Media5 Mediatrix 4104, Reference Manual

Page: 325 / 466

Mediatrix 4104 303
C
H A P T E R
23
Subscriber Services
The Mediatrix 4104 offers subscriber services users can directly access on their telephone. However, you
must set these services before they can be used.
Most of the variables related to the subscriber services are located in tables. These tables display the
information for all lines. Before changing a parameter value, build its corresponding table with your MIB
browser’s table functionality.
You can also set these parameters via the web interface, as described in “Call Forward” on page 89 and
“Services” on page 94 .
Service Activation Processing
The user can activate a service in two ways:

By performing a standard flash hook.

By performing a flash hook and entering a digit to activate a specific service. The digit dialed
has a different behaviour depending on the current call context.
You can define which of these two methods is available to your users.

To define the service activation processing:
1. In the subscriberServicesMIB , locate the subscriberServicesProcessingTrigger variable.
2. Select which action the user must perform to trigger a service change by setting the
subscriberServicesProcessingTrigger variable:
In the Unit Manager Network Administration Manual , refer to chapter Subscriber Services Parameters , section
SIP Configuration Window .
Table 209: Service Activation Parameters
Parameter Description
flashHook The user must perform a flash hook to activate a service.