Media5 Mediatrix 4104 Reference Manual Download Page 25

Page: 25 / 466

Mediatrix 4104

H A P T E R

Installation

This chapter describes the installation and initial provisioning of the Mediatrix 4104.

Requirements

The Mediatrix 4104 requires the following items to work properly:

Safety Recommendations

To ensure general safety, follow these guidelines:



Do not open or disassemble the Mediatrix 4104.



Do not get the Mediatrix 4104 wet or pour liquids into it.



Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.

Package Contents

The Mediatrix 4104 package contains the following items:



the Mediatrix 4104 unit



a power cord for the country in which you are using the Mediatrix 4104



a printed Flyer

You may also need additional 10/100 BaseT Ethernet RJ-45 cables.

Table 2:

Required Items

Item

Description

DHCP Server (optional)

Supplies network parameters to the Mediatrix 4104.

DNS Server (optional)

Translates domain names into IP addresses.

SIP Server

Manages the active calls of the Mediatrix 4104.

Management Server
(optional)

Module or software used to remotely manage and configure the Mediatrix 4104.
Such software could be the Media5 Unit Manager Network. See

“Unit Manager

Network – Element Management System” on page xxii

for more details.

TFTP Server or HTTP
Server

Necessary for software updates.

Syslog Daemon
(optional)

Receives all status messages coming from the Mediatrix 4104.

Summary of Contents for Mediatrix 4104



















































































































































































































































































































































































































































































Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands

Media5 Mediatrix 4104, Reference Manual

Search results

Summary of Contents for Mediatrix 4104

Reviews:

Related manuals for Mediatrix 4104

Brands by name

Popular brands