MediaGate USA Inc. 12
Network Connections
You may have an Ethernet cable plugged into the unit and have the wireless antenna
connected (Wi-Fi antenna is optional). Neither will interfere with the other, but only
one network can be accessed at a time (wired or wireless).
Connection Diagram
Following is a connection example with network and UPnP devices.
Set Up MG-800HD
Follow these steps to set up MG-800HD
Turn on the TV. Set the video sources selector on your TV to match the connection from
your MG-800HD. For example, if you used HDMI, set the TV to use “HDMI” Input
1. Turn on MG-800HD. The LED on the front panel of the MG-800HD lights up to show
that it is powered on.
2. Check the TV display. The default display of MG-800HD is Composite(CVBS). If
you use HDMI, aim the remote control at the Power
Note:
If no sound is heard after connecting the Optical/Coaxial cable, check if you have
changed the audio setup of MG-800HD to Digital mode. Please go to Setup
System
Setup
Audio Setup for configuration.
Ethernet port
Wi-Fi antenna
(optional)