4
EN
General settings:
■
AWB – select white balance [auto/sunlight/fluores-
cence/cloudy/tungsten].
■
Exposure – select exposure compensation [from -3EV
to 3V].
■
Color – select color effect for front camera capture [nor-
mal/mono/negative/ancient/light blue].
■
Auto Detect - start to record when movement is de-
tected in the camera sight [on/off].
■
Time Stamp – data stamp on recorded movies [on/off].
■
Audio – record movies with sound [on/off].
■
Language [select menu language].
■
Frequency – select according to power grid parameters
when recording with indoor lighting [50Hz/60Hz].
■
Parking Guard – when option is enabled and device is
powered off it can automatically power on and record
movie when shock is detected [off/on].
■
Keytone – button beep [on/off].
■
G_sensor – select G-sensor sensitivity, when shock is
detected actual file will be secured [high/medium/low/
off].
■
Backlight time – select time to power off LCD for power
saving [10sec/1min/3min/off].
■
TV System – function disabled.
■
IR light – select when IR LED support light is activated
[off/on/auto].
■
Delay Power Off – select idle time to power off for pow-
er saving [10sec/30sec/1min/3min/off].
■
Version Info – show firmware version.
■
Date set – set actual date and time, use UP/DOWN but-
ton to set value, use MODE button to switch next value.
■
Format – perform microSD card format. Caution! All
data will be lost.
■
Default set – restore default settings.
Using the device
Plug in the charger, device will power on and start to re-
cord automatically. When device is powered on manually
press OK button to start/stop recording.
When device is in standby mode you can press shortly
POWER to switch IR LED mode manually [off/on/auto].
When device is recording you can press SOS button or
MENU button to secure actual file (from both cameras).
When device is recording you can press DOWN button to
manually set record with audio [on/off].
When device is recording or in standby mode press short-
ly UP button to switch camera viewing modes.
■
Record time – select sequence duration in the loop re-
cording mode [1min/3min/5min/off].
Note!When OFF option is selected then loop option is
off. Device will record movies up 4GB till microSD card
is full and then stop recording.
