media-tech MT5013, User Manual

Page: 6 / 12

6
EN
Set up a destination
Make sure the GPS (Green) LED is fl ashing.
NOTE: The USB port side must face the user and the
power switch side must be toward the direction the
user head to.
Press the setting button for 2 seconds, and then all di-
rection (Red) LEDs will fl ash together for 3 seconds.
The Destination (Blue) LED fl ashes after all direction
(Red) LEDs have fl ashed, which indicates the position
has been saved. When its at LF mode the device is not
storing any track, therefore, please switch device DL
mode for data log. DL mode can also be used as LF lock
key; to prevent destination stored in LF been erased.
Note: If Destination LED (Blue) doesn’t fl ash after
the Direction LED (Red), please try again.
Upload your favorite location from Photo
Tagger software
In addition to setting up the destination on GPS MULTI-
TRACKER, you can also upload the coordinate location
from Photo Tagger software. For further instruction, ple-
ase refer to the user manual of Photo Tagger software.
Using software to preset destination
1. Places that you’ve never been: Find a search engine
on the left hand bottom of software. After entering
the desired address, press search to fi nd your target.
After the target location has been indicated, add a
blue “balloon” sign (indicate on the right hand top
of the map displaying screen).