5
EN
1. Insert the battery pack into the battery compartment
2. You may charge the battery in 2 ways:
(a)
Plug the USB mini B of the supplied USB cable to
the USB port of the copier, and plug the other USB
end into the USB port of your computer/notebook.
Please charge the battery at least 5.5~6 hours prior
to your fi rst use.
3. Red LED will light on during charging. When the bat-
tery pack is fully charged, the red LED light will be off
and you may disconnect the charging connections.
Status LED:
Red: The Image Copier is OFF, the battery is charging.
Purple: The Image Copier is ON, the battery is charged
simultaneously.
Blue: The Image Copier is ON, the battery is not charg-
ing or no battery is loaded.
(b)
Plug the USB mini B of the supplied AC adaptor
(optional) to the USB port of the copier, and plug the
adaptor to the
power
outlet.
Please charge the
battery at least
2.5~3
hours.
2. Put a 135 positive slide/negative fi lm/110 negative
into holder as shown.
3. Close the holder and please make sure the holder
close properly.
Place Film / Slide Into The Holder
1. Keep the glossy surface in the upward direction.
Open the negative/ positive slide holder as Illustrated.
