6
EN
Notice:
■
If you installed the firewall software in your PC, when
you run the LSearch_en�exe, it may pop up a window
to say “whether you want to block this program or not”,
then you should choose not to block�
■
You can hold on reset button on the camera for 10 sec-
onds to restore factory default if you forget user name
and password, during the process, don’t disconnect the
power, otherwise the camera maybe damaged�
Before connecting camera to router by WiFi, please con-
nect via LAN as shown earlier and enter WiFi setting, and
then operate as the following step�
Click the “Scan” button, it will show you all detected wire-
less networks� Select one of them and tick “Using Wireless
Lan”, then the relevant data of the selected wireless net-
work will be shown in the following blanks� Input the pass-
word and click “Submit”, then the WiFi setting is finished�
Unplug the cable, camera will be connected to router by
WiFi automatically�
Notice: When the device is connected both WiFi and wired,
it will firstly connect to the wired network� If the camera
enables DHCP to obtain IP address automatically, so the IP
address is not same in wired connection and WiFi connec-
tion, recommend to set fixed IP address for the camera�
Connecting camera to local WiFi
You can connect the camera to your local router by wire-
less connection�
MT4050
