Media Pointe TAC-CR User Manual Download Page 68

Page: 68 / 71

D15345.19 Cisco Webex Devices with Touch 10 User Guide

JUNE 2020

Tap and hold the selfview image.

The selfview image turns blue. You can

see the alternate positions available for the

selfview image. Keep holding the image.

Release the image by lifting your finger from the

screen. The selfview image has now assumed its

new position.

Move the Selfview PiP

Camera

Selfview shows what others see
from your device. You can use it to

confirm that they see what you want

them to see.

The selfview appears as a PiP

(Picture-in-Picture).

From time to time you may want

to have the selfview activated

during the meeting. This could, for
example, be to ensure that you
remain seen on the screen.

It may happen that the current
position of the selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.

Why Move the Selfview?

Drag the image to a new position, shown here is

the upper left corner.

Summary of Contents for TAC-CR































































Search results

Summary of Contents for TAC-CR

Reviews:

Brands by name

Popular brands

Media Pointe TAC-CR, User Manual

Search results

Summary of Contents for TAC-CR

Reviews:

Brands by name

Popular brands