DMR100
User’s Guide
V2.0
3
Copyright and Trademarks
©
2006, Advanced Media Design, Inc.
667 Rancho Conejo Blvd.
Newbury Park, CA 91320
USA
All rights reserved. This document contains information that is proprietary to Advanced Media Design, the
manufacturer of all MediaPOINTE
®
products. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying,
or otherwise, without the prior written permission of Advanced Media Design, Inc. Nationally and
internationally recognized trademarks and trade names are the property of their respective holders and are
hereby acknowledged.
MediaPOINTE
®
is a registered trademark of Advanced Media Design, Inc
Disclaimer
The information in this document is furnished for informational purposes only, is subject to change without
prior notice. Documentation may include technical or other inaccuracies or typographical errors. The
technical documentation is being delivered to you AS IS and Advanced Media Design, Inc. makes no warranty
as to its accuracy or use.
Safety Precautions
For your protection, please read all related safety instructions, observe all warnings and precautions, and
exercise common sense while operating this electronic equipment.
•
Always place the unit on a stable cart, stand or table.
•
Do not use the unit near water or sources of heat.
•
Do not drop or shake the unit. Do not place or install the unit in environments where it can be dropped or
shaken. Make sure the unit is powered off while being moved even for short distances.
•
Observe the power requirements of the unit; if you are not sure of the power available, consult your local
dealer or power company.
•
When plugging into a power outlet, insert the plug firmly into the outlet. Route the power cord so as to
avoid any activity that may result in fraying or other damage to the cord or the plug.
•
Do not attempt to defeat the polarization or grounding protection on the plug under any circumstances.
•
Do not overload wall outlets, extension cords, or integral convenience receptacles.
•
Unplug the unit from the wall before cleaning. Do not use liquid or aerosol cleaners.
•
For proper ventilation, do not block the slots and openings in the case. Do not install the unit in a location
where the ventilation slots and openings can be plugged during everyday use.
•
Do not place or install the unit under, on top of or near any heat-producing equipment (i.e. radiators,
stoves, or amplifiers), or in a heated place.
•
Unplug the unit during lighting storms or when it will not be used for extended periods of time.
If the unit is visibly damaged either by not observing the precautions above or for any other reason, contact
your local dealer immediately. If the unit does not operate normally when you follow the operating
instructions, or it exhibits a distinct change in performance, this may be an indication of a problem needing
repair.
