If further assistance is required, contact CircAid® Customer Service by
phone at
(800) CIRCaId (247-2243)
or by email at
.
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
FINISHED
FINISHED
DONNING THE GRADUATE™ CUSTOM BOOT
stEP 1:
Don enclosed sock liner.
stEP 2:
Secure the foot straps at their
loosest position. Slide the foot into the
top opening like a slipper, and firmly
press the heel into the heel cup.
stEP 3:
Ensure that the foot is properly
aligned within the garment; the front
edge of the Graduate™ Boot should align
with the base of the toes. Fasten the
hook tab on the foam padding to secure
foot placement.
stEP 4:
Detach the strap nearest to the
toes, pull the strap up and across the
foot, and fasten to the Graduate™ Boot.
stEP 5:
Detach the middle strap, pull the
strap up and across the foot in the
opposite direction as the first strap, and
fasten it to the Boot.
stEP 6:
Lift up the strap closest to the
ankle, pull the strap up and across the
foot in the same direction as the first
strap, and fasten it to the Graduate™
Boot.
stEP 7:
Readjust the bands as necessary
throughout the day to maintain a firm
and comfortable compression level.
REMOVAL
stEP 1:
Disengage all hook tabs of the
Graduate™ Boot and loosen the straps.
stEP 2:
Refasten the hook tabs at their
loosest position.
stEP 3:
Slide the Graduate™ Boot off the
foot.
stEP 4:
Slide the liner off the leg.
REMEMBER: The Graduate™ Custom Boot should
never hurt. It should feel firm but comfortable. If
pressure increases or decreases noticeably during
wear, loosen or tighten any bands accordingly.
IF EXPERIENCING ANy PAIN,
IMMEDIATELy REMoVE THE BooT
AND CoNSULT yoUR PHySICIAN.
DIRECTIONS FOR USE