Service manual 1533-2003-S
42 of 108
Version 1.0.2/2020
Medema Production A/S
Problem
Possible causes
Solution
The ready lamp on the
charger does not light up
even though the charger
has been on for 10-12
hours.
(Read the operating in-
structions for the charger)
There has been a power
cut.
The charger is doing a
top-up charge.
There is a problem with
the batteries.
There is a fault in the
charging plug for the Mini
Crosser
Reconnect the charger
and repeat the charging
process.
Check again after half an
hour.
Contact supplier.
Push the charging plug all
the way in and repeat the
charging process.
The ready lamp on the
charger lights up even
when partly discharged
batteries are connected.
(Read the operating in-
structions for the charger)
The fuse in the charger
has blown.
The switch in the charging
plug is malfunctioning.
Contact supplier.
Contact supplier.
The charging lamp indi-
cates a fault:
Read the operating in-
structions for the charger.
The charging plug has not
been inserted or there is a
mains fault.
The battery voltage is too
low for charging to start.
Push the charger plug in
or contact the supplier.
Contact supplier.
