Medema MC 1122 Quantum, Service Manual

Page: 7 / 70

Service Manual P9-0222-S 7 of 70 Version 1.0.0/2013
Medema Production A/S
Safe servicing
To avoid injuries to both the service engineer and the
subsequent user of the MC Concept, it is important to get to
know the product before servicing it.
Be particularly aware of the following:
Š
The MC Concept MUST be turned off at the main switch. If
electrical components are being serviced, the positive terminal on
the battery MUST also be disconnected.
Š
If the voltage needs to be measured in the course of
troubleshooting, take great care not to short-circuit anything.
Š
Take great care not to short-circuit the battery terminals.
Š
Be careful not to lift heavy parts such as the seat, battery and
motor gear incorrectly or drop them.
Š
Make sure to raise one rear wheel off the ground so that the MC
Concept cannot drive off accidentally.
Š
Use professionally maintained tools.
Š
Where lock nuts are used, NEW ones MUST be fitted when the
MC Concept is reassembled.
Š
Take care to fit new cable strips in the same way as the old ones.
Make sure that no cables can be trapped by moving parts or stick
out in such a way as to catch on things.
Š
End every service by making sure that the product is roadworthy:
- Check that all the connectors are plugged in correctly.
- Check that all the mechanical parts are properly secured.