User Manual P9-0139-B
34 of 39
Version 1.0.2-2015
User Manual P9-0139-B
34 of 39
Version 1.0.2-2015
Medema A/S
Operating electrical functions
All of the electrical functions are fitted as standard equipment
with a control unit for single function. If two electrical functions
are chosen, a unit is fitted under each armrest. If three or four
electrical functions are desired, one or two double control units
must be purchased. If the user wants to operate two electrical
functions from the same armrest, a double control unit must
also be purchased.
Electrical seat hoist and electrical seat rotation, stop in the end
positions via switches. Electrical backrest and electrical seat
front/back position stop via power limiting. To control this, a PCB
must be used, which is fitted in a unit. The unit can house up
to three PCBs. Therefore, if an electrical backrest or electrical
seat with front/back position been chosen, the following must be
purchased:
Unit for a single electrical
function.
M-127-02-576
Unit for two electrical
functions.
M-127-02-052
Unit for a Concens' PCB.
M-127-02-585
Basis actuator controller
C2-10.
SR-05893 (one per electrical
function)
